Nitrogen Generator for Nitrogen Concentrator / Turbo Evaporator
Technical Specification :
| Principle Specifications | For Turbo Evaporator (NG-02T) |
| Moisture | 50-200 ppm |
| Total Hydro Carbon | < 10 ppm |
| CO & CO2 | < 10 ppm |
| Purity | 95% |
| Micron particles | 0.01μ |
| Capacity of N2 Generator | 50 LPM to 300 LPM at 60 psig (as per selection of model) |
| Method of purification | Pressure Swing Adsorption (PSA) |
| Room temperature | 15 °C - 25 °C |
| Start up time | 1 hrs |
| Electrical requirements | 230 V AC, 50 Hz, 1 Phase & Air Compressor 440VAC, 50Hz |
| Dimenssion N2 Generators in mm | 800H X 400W X 800D ( for 50 LPM) 800H X 400W X 900D (for 100 LPM) 800H X 400W X 900D (for 140 LPM) 1200H X 900W X 900D (for 200 LPM) 1400H X 900W X 900D (for 300 LPM) |
| Net Weight | 100 kg - 300 kg (as per selection of model) |
Installation Diagram for Nitrogen Generator for Nitrogen Concentrator / Turbo Evaporator:
