3 IN 1 Combination Generator for N2, ZA & H2
Model : NHZA-03A (Modular & Stackable)
- Combination Gas Generator for UHP Nitrogen, Zero Air & Hydrogen
- Nitrogen & Air Generator produces a continuous flow of high purity Nitrogen at selected pressure
- The modular Pressure Swing Adsorption (PSA) unit operates with alternating pressure increase and decrease.
- Air flows under pressure through the reaction towers containing molecular sieve adsorber.
- Moisture, CO, CO, THC, Oxygen and other unwanted components in the air are adsorbed, leaving Zero Air & Nitrogen Gas of required purity.
- High Purity Hydrogen Gas Generator.
- Hydrogen is produced in the PGH Series Hydrogen Generators by the most advanced electrolytic membrane technology.
- The application of voltage across the electrolyte results in hydrolysis, breaking down the water molecule into hydrogen and oxygen gas, which are separated by the gas permeable membrane.
- Modular & Stackable, Floor Space Saving design with small footprint.
Principle of 3 in 1 Gas Generator Model-NHZA-03A
| Principle | N2 Gas | Zero Air | H2 Gas |
| Moisture | < 5ppm | < 5ppm | < 5ppm |
| Oxygen | < 5ppm | - | < 5ppm |
| Total Hydrocarbon (THC) | 0.5 ppm | 0.3 ppm | 0.3 ppm |
| CO & CO2 | < 2ppm | < 2ppm | < 2ppm |
| Purity | UHP | UHP | UHP |
| Micron particles | 0.01μ | 0.01μ | 0.01μ |
| Capacity of NHZA-03A | 200 ml/min at 5kg/cm2 | 1500 ml/min at 5kg/cm2 | 300 ml/min at 5kg/cm2 |
| Air Compressor | Inbuilt | Inbuilt | NA |
| Method of Purification | Pressure Swing Adsorption and Depressurization | Catalytic conversion Filtration | PEM Technology |
| Room Temperature | 10°C to 25°C | ||
| Start up time | 2hr/programmable by timer | 10 min | 30 min |
| Electrical Supply | 230 V AC, 50Hz, 1ph, 5 amp | ||
| Size of the 3 in 1 Generator | 1100 H X 350 W X 600 D mm | ||
| Weight (approx.) | 90 kg | ||
| Power Consumption | 600W | ||
| Gas Outlet Port | 1/8" OD | 1/8" OD | 1/8" OD |
